Results 1,591 to 1,600 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
-
05-18-2016, 06:37 PM #1591
- Join Date
- May 2016
- Posts
- 2
Do baby your buildtak mine ripped up in the middle after less than 2 weeks light use and thus far maghold responded with buildtak is not covered under any warranty exact phrase it could last 1 print it could last 100.
-
05-18-2016, 07:00 PM #1592
Very nice, thanks for the detailed description and introduction! Where did you get those cool models?
It is 3 pieces and I made the designs for the horizontal and vertical brace parts. They are working really good in protecting the extruder wires/filament tubes and I haven't gone any further with the idea yet.
Qidi Tech Acrylic Printer Cover Filament Guide / Acrylic Straightener
http://www.thingiverse.com/thing:1495141
Qidi Tech Acrylic Printer Cover Extruder Wire Protector / Acrylic Straightener
http://www.thingiverse.com/thing:1536269
Note: I am using the flat guide instead of the arched one. The arched one looked better but allowed the guide to rub a little with the angle I had for the filament tubes coming into the lid.Last edited by cncartist; 05-18-2016 at 07:06 PM. Reason: added note
-
05-18-2016, 07:53 PM #1593
- Join Date
- Aug 2014
- Posts
- 627
I have a question and that is you level the bed but you want the Mightyboard to start Z just a little lower or a little higher before it lays down the first bead. How do you do it? I could have sworn I saw on the panel a compensation setting for Z but the last time I printed I never did find it.
-
05-18-2016, 10:03 PM #1594
- Join Date
- May 2016
- Posts
- 9
YESSSSSS! I was able to get my QIDI today and set it up with the fan part, the new spool holders(rather not the black ones but metal), and the 7.8 firmware...Right now it is rockin and rolling. Thanks to you guys for the start Gcodes as they are working great! I tried for both ABS and PLA. Tho the PLA is coming out bumpy and not smooth like the ABS...Is this normal? I will try to take a photo and attach it..
Last edited by chill24; 05-18-2016 at 10:11 PM. Reason: forgot photo
-
05-18-2016, 10:11 PM #1595
- Join Date
- May 2016
- Posts
- 9
Sorry, I can't get the picture to load...
-
05-18-2016, 10:35 PM #1596
- Join Date
- Aug 2014
- Posts
- 627
I found it - http://www.sailfishfirmware.com/doc/...ties-menu.html and even easier http://www.sailfishfirmware.com/doc/details-z-home-offset.html
In S3D
Last edited by DarkAlchemist; 05-18-2016 at 11:38 PM.
-
05-19-2016, 06:13 AM #1597
- Join Date
- May 2016
- Posts
- 6
Hey, I got them from here:
http://www.printablescenery.com/
They're not free.
if anybody is interested in the theme, I suggest you click on the indiegogo banner at the top of that page, they're offering a big bundle there containing mostly everything they did until now.
-
05-19-2016, 06:29 AM #1598
- Join Date
- Apr 2016
- Posts
- 1
I see they are selling the 10mm rod kits on Ebay now. $30.00 plus 20.00 shipping from China. I sent them a message and they said it was a 10mm kit as it doesn't say it in the description.
-
05-19-2016, 06:34 AM #1599
- Join Date
- May 2016
- Posts
- 21
No. that nozzle along with the tube was removed a long time ago to try and clear the clog.
-
05-19-2016, 07:10 AM #1600
- Join Date
- May 2016
- Posts
- 31
Nice I thought they'd make it available. Good to see.
http://www.ebay.com/itm/331859377907
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion