Results 1 to 5 of 5
-
05-17-2016, 09:14 PM #1
I made a 3d printable tabletop game called Shapes the Game. Check it out!
Shapes the Game is a dexterity game with cards.
The STL models are available to download on the print and play page at
http://shapesthegame.com/
Also, check out the gameplay video
https://youtu.be/b6cnqxkZwr4
-
05-18-2016, 05:09 AM #2
looks like fun - but maybe over complicated ?
I got lost about halfway through the explanation of the rules. :-)
And I've played more than a few card and board games in my time.
The idea is good.
But instead of all those extra rules, just have a time limit on the balancing side of things. Maybe 5 seconds per piece you're placing.
Got to be a 3d printed timer around somewhere :-)Last edited by curious aardvark; 05-20-2016 at 03:02 PM.
-
05-18-2016, 08:38 AM #3
I agree with the aardvark. way too complicated.
-
05-21-2016, 01:25 PM #4
Too complicated
Thanks for the feedback guys. We made a simpler version of the game called Shapes the Game: Survivor that even kids can play. The rules are much, much simpler and even kids can play. This is the version we have been demoing at events with lots of foot traffic lately. You can see these rules at the second half of the rules page:
http://shapesthegame.com/rules.pdf
-
05-23-2016, 08:29 PM #5
- Join Date
- Apr 2016
- Posts
- 3
This is the version we have been demoing at events with lots of foot traffic lately
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion