Results 1 to 2 of 2
Threaded View
-
05-12-2016, 12:14 PM #2
- Join Date
- Sep 2013
- Posts
- 6
Hey Redox,
Here is the web page that links to software dl, instructions, and the peachy forum:
http://www.peachyprinter.com/#!get-started/en0zq
As long as you haven't upgraded the firmware on the board, that link should just work.
Good luck with the build!Last edited by NathanGrayston; 05-12-2016 at 12:17 PM. Reason: forgot to mention something...
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion