Results 1 to 10 of 14
Threaded View
-
05-05-2016, 03:36 PM #11
- Join Date
- Apr 2016
- Posts
- 30
i switched to flashprint and the benchy boat print turned out pretty good. then i wanted to do another print, but already the first layer looked really bad. settings were 0.3mm... where do these blobs come from? over extrusion?
DSC_0746.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion