Results 1 to 10 of 11
Thread: Question about Sketchup and Cura
Threaded View
-
04-23-2016, 08:52 PM #8
It was your STL's for some reason.
try these instead
Unsure as to why your STL's were not right, it was the way they were generated. I just re-generated them as a standard binary ASCII STL.
new_bottom.stlnew_top.stlHex3D - 3D Printing and Design http://www.hex3d.com
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help