Results 1 to 10 of 125
Thread: 10" Pegasus Build
Threaded View
-
04-13-2016, 03:48 PM #22
- Join Date
- Jan 2016
- Posts
- 34
Sounds like a clog or to low of a temperature. Make sure your temp sensor is not working its way out of the extruder.
edit...
Also check your extruder stepper current limiting. Also check your extrusion speed and acceleration, stepper can loose position if you go crazy fast or have to low current settings.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion