Results 1 to 4 of 4
Threaded View
-
04-07-2016, 05:27 AM #2
150% first layer ?
????????????????????
First layer is usually 90% - I've changed mine to 100.
But having a 0.3mm first layer on a 0.2mm print does seem a bit odd.
so every 6.35mm it over extrudes.
Either that or the z-drop is ever so slightly less than it should be and every 6.35mm the bead gets squashed.
And congrats on the machine :-)
Had a look, pricey, but great looking bit of kit.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion