Results 1 to 10 of 14
Thread: Heated Bed Suddenly Not Working.
Threaded View
-
04-01-2016, 10:35 AM #7
- Join Date
- Jul 2014
- Posts
- 305
I apologize for not responding sooner but yesterday my computer was taken over by Ransomware the same time my printer stopped working and had to put my printer to the side to get my life back together.
Late last night I found the issue. I was testing every connection for continuity and found that from the PS to SSR I was getting no continuity. So I unscrewed the wire from the SSR and found that the wire oxidized and there was a little burn mark on the SSR plastic. Which is really interesting as I use high quality silicon wire and that is why the plastic shielding didn't melt but the wire experienced a spike in current or volts and become unusable. So I replaced the wire and we are working again.
Here is a picture of the oxidized wire next to what it should look like:
https://scontent.xx.fbcdn.net/hphoto...fe&oe=578C7A03Last edited by BLKKROW; 04-01-2016 at 12:17 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion