Results 1 to 10 of 321
Thread: Flashforge 3D Creator forum.
Threaded View
-
03-05-2014, 11:06 AM #11
- Join Date
- Feb 2014
- Posts
- 14
Geoff - thanks for the tips - I disassembled the unit, managed to remove the filament and cleaned the toothed gear - it was pretty clean. On reassembly it still will not feed - It appears that something is blocking the nozzle - I should think that the next step is to remove and clean the nozzle.
Your notes indicate that the next step is to drill out the nozzle - did you remove the nozzle before drilling? That is not clear from your description. I guess the hole could be drilled out while it is mounted but it makes more sense to remove it and try a solvent (acetone?) first.
Thanks again for your help.
dave
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help