Results 1 to 7 of 7
Thread: Help! Micro3d Printer failing
Threaded View
-
03-19-2016, 02:20 AM #7
- Join Date
- Feb 2016
- Posts
- 3
Hi again, sorry about the delay I sorta left printing for a while and after updating the printer everything seems back to normal.. It does make quite a lot of noise and I also noticed that before I print I must scrape away some dribbled ink that always comes through at the start of a print or else it will interfere with the fan and sometimes the print raft.
login problem has been solved by m3d.
Thanks all for the input I will keep this in mind should I have any further issues
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion