Results 1 to 1 of 1
-
03-12-2016, 05:36 AM #1
- Join Date
- Mar 2016
- Posts
- 1
Makerbot 2 X/Y plain surfaces question.
When printing a flat surface in the X/Y plain (same plain as the build plate) I was wondering if anyone can recommend any good settings to get a smooth surface, at the moment vertical surfaces are smooth but as soon as it starts working on the horizontal surface, it has a really rough texture, as if the print head is leaving a big gap (like 0.5mm) between each pass.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion