Results 1 to 10 of 32
Thread: Marlin V 1.1 RC3
Threaded View
-
03-05-2016, 09:37 PM #6
Thanks, I know I had to change pins.h to add the z-probe servo and Configuration_adv.h to relocate the extruder fan pin after I accidentally shorted the original one! I also changed the DEFAULT_STEPPER_DEACTIVE_TIME to accommodate ABL if the Z axis was set higher than usual.
Time to play.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion