Results 1 to 10 of 32
Thread: Marlin V 1.1 RC3
Threaded View
-
03-05-2016, 09:25 PM #5
- Join Date
- Dec 2015
- Posts
- 24
Unless you're running very nonstandardized hardware, Configuration.h is the only thing you need to mess with.
Unless you're running very nonstandardized hardware, Configuration.h is the only thing you need to mess with.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion