Results 1 to 5 of 5
Threaded View
-
02-24-2016, 06:28 PM #3
- Join Date
- Jul 2015
- Posts
- 15
You can open ASC files with Meshlab (free) then export as an STL and use either GOM Inspect (free) or MeshMixer (free) to clean up for mesh.
You can open ASC files with Meshlab (free) then export as an STL and use either GOM Inspect (free) or MeshMixer (free) to clean up for mesh.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion