Close



Page 18 of 411 FirstFirst ... 816171819202868118 ... LastLast
Results 171 to 180 of 4110
  1. #171
    Quote Originally Posted by rcleav View Post
    It has MK10 extruders.
    I would recommend you upgrade to these http://www.micro-swiss.com/#!product...e-cece31e3ba6f
    More then just a nozzle but it eliminates the PTFE tube which will allow a little higher temp.
    The stock nozzles are brass and will wear out with some of those filaments.
    What other modifications have you done to your printer?

  2. #172
    Engineer-in-Training rcleav's Avatar
    Join Date
    Oct 2015
    Location
    Omaha
    Posts
    274
    Add rcleav on Thingiverse
    If you go back in this thread I made a list of printed parts that I recommend to help with filament path alignment.
    I only modified the extruders, firmware and use a glass build plate.

  3. #173
    Quote Originally Posted by rcleav View Post
    If you go back in this thread I made a list of printed parts that I recommend to help with filament path alignment.
    I only modified the extruders, firmware and use a glass build plate.
    Oh yeah I saw those and pretty much did those too. I did opt for the magholder build plate. I do wonder why are my prints sticking too muh to the plate? I have the plate at 20c. Anyone knows why they overstick?

  4. #174
    Hi all, pretty interested in this printer but it's hard to find pictures of sample prints. Would some of you be willing to share more and give a perspective after the new printer vibe has worn off? This forum seems to be the only active one about the qidi!

  5. #175
    Engineer-in-Training rcleav's Avatar
    Join Date
    Oct 2015
    Location
    Omaha
    Posts
    274
    Add rcleav on Thingiverse
    I have a few pictures of things I printed with my Qidi. I did 4 Tardis's for friends and all of the red parts on the CTC Printer and the windows where for a friend that does highly detailed railroad layouts. I don't have pictures of everything.

    IMAG0444.jpgIMAG0463.jpgIMAG0430.jpgIMAG0442.jpg

  6. #176
    Quote Originally Posted by bluemeane View Post
    I am not getting very good results with semiflex. I get a GREAT skirts, then it goes all funky and sputters, like it isn't consistently extruding...

    It is gappy, and works for a little but, then it sputters, then good then sputter lol.

    Can you share your settings? Like screen shots of the pages? I would LOVE it, and you lol if you could. I am even using the upgraded extruder from thingiverse. It feeds great when you are doing the 'load filament' and like I said when it lays down the skirt but then sucks after that lol.

    Also only 205???

    I see everyone using 250 lol, thta is what I am trying, I will try that next! I am also runing SUPER slow at like 600mm/min lol.


    HELP!!!! lol
    These are the setting that I'm currently using:
    Nozzle temp:205
    heat bed: 20
    These settings might not be completely correct but I was able to successfully print a vase shape. I'll post a picture of it later today.
    Settings1.jpgSettings Layer.jpgSettings3.jpgSettings4.jpgSettings5.jpg
    Last edited by migdobbs; 02-17-2016 at 10:43 PM.

  7. #177
    Quote Originally Posted by migdobbs View Post
    Oh yeah I saw those and pretty much did those too. I did opt for the magholder build plate. I do wonder why are my prints sticking too muh to the plate? I have the plate at 20c. Anyone knows why they overstick?
    You have the maghold as well? I LOVE mine! I had a rough first print because I didn't have it lined up well, but since then it has been amazing!!! I only wonder how hard it will be to replace the buildtak lol.

  8. #178
    Quote Originally Posted by rcleav View Post
    I have a few pictures of things I printed with my Qidi. I did 4 Tardis's for friends and all of the red parts on the CTC Printer and the windows where for a friend that does highly detailed railroad layouts. I don't have pictures of everything.

    IMAG0444.jpgIMAG0463.jpgIMAG0430.jpgIMAG0442.jpg
    I see you got white ABS and blue PLA as well? lol

    What tardis is that?! Its pretty awesome! I wonder if it can be done in dual extrusion? Care to share the files?

  9. #179
    Quote Originally Posted by migdobbs View Post
    These are the setting that I'm currently using:
    Nozzle temp:205
    heat bed: 20
    These settings might not be completely correct but I was able to successfully print a vase shape. I'll post a picture of it later today.

    Settings1.jpgAttachment 8743Settings3.jpgSettings4.jpgSettings5.jpg
    Nice. I was able to get a good print (For the most part lol), You are missing some screens lol You have one twice there lol. Looking forward to your pictures!

  10. #180
    Engineer-in-Training rcleav's Avatar
    Join Date
    Oct 2015
    Location
    Omaha
    Posts
    274
    Add rcleav on Thingiverse
    Quote Originally Posted by bluemeane View Post
    I see you got white ABS and blue PLA as well? lol

    What tardis is that?! Its pretty awesome! I wonder if it can be done in dual extrusion? Care to share the files?
    Not my design it's a multi part snap together print that can be found at https://www.thingiverse.com/thing:124033

Page 18 of 411 FirstFirst ... 816171819202868118 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •