Close



Results 1 to 4 of 4
  1. #1

    best way to clean print?

    I just finally got my first little print (a piece of jewelry) and I am happy with it. I knew it would need to be cleaned up but wondered if anyone has a suggestion of the best way to do this? It is a flat object with open areas and am thinking needle files might be too rough for this delicate an item. Sandpaper? I can't wait to try other objects and to learn how to design my own things!

  2. #2
    well,u may google it ....if u r really looking for.!!!!!!!!!!thanks

  3. #3
    Engineer ralphzoontjens's Avatar
    Join Date
    Nov 2013
    Location
    Tilburg, the Netherlands
    Posts
    533
    Follow ralphzoontjens On Twitter Add ralphzoontjens on Facebook Add ralphzoontjens on Shapeways Add ralphzoontjens on Thingiverse
    You can first sand the item with very high grit paper. Then use buffing wheels, for example on a small Dremel tool, with polishing paste. There are ultrasonic cleaners available to remove polishing residue.

    Be aware that in some 3D printing processes, the outer layer is added by electroplating. In that case, be very careful with finishing as the outer layer is only a few microns thick. This makes many 3D printing processes not suitable for creating durable jewelry.

  4. #4
    I would use acetone. It really depends what type of plastic was used.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •