Results 1 to 5 of 5
Threaded View
-
02-04-2016, 07:06 PM #5
- Join Date
- Feb 2015
- Location
- Brazil
- Posts
- 26
I second the lower Z solution. Starting the print job with the Z above 40mm times out (skips) the ABL for me here too.
BTW no problems with the Tower Pro servo here (over 6 months of usage) on BeckDac.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion