Results 1 to 4 of 4
Threaded View
-
01-26-2016, 09:13 AM #4
Here's the paper:
http://hyrel3d.net/papers/3D_Printed...e_Deficits.pdf
Sr-HT-Gahnite scaffolds were fabricated by printing the inks through a600 μm custom-made nozzle using a robotic deposition device (Hyrel 3D, USA).Last edited by Davo; 01-26-2016 at 09:22 AM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion