Results 1 to 9 of 9
Threaded View
-
01-25-2016, 07:29 AM #7
the other alternative is to use makerware.
works quite well and is better than simplify3d for dual colour/material prints.
Simplify 3d is much better for everything else. makerware is free - so buy simplify3d and have the best of all worlds :-)
The other thing you can try is the klick-n-print gcode convertor: http://knp3d.com/software/#knp3dconverter
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion