Results 1 to 10 of 10
Thread: Itty Bitty Double Flex nightmare
Threaded View
-
01-19-2016, 07:11 PM #3
- Join Date
- Oct 2014
- Posts
- 134
OK, lowering the extrusion multiplier is making a huge difference. I have used an extrusion multiplier of .90 in S3D forever and gotten great results. I'm down to .50 and getting ready to go a bit lower yet to get the right print.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion