Results 1 to 5 of 5
-
01-11-2016, 06:51 PM #1
- Join Date
- Jan 2015
- Posts
- 48
Hexagon Hot End replacement Silicone Boot
Hey does anybody know how to get a replacement silicone insulation boot for the Hexagon? Mine got wrecked in an accident. The rest of the hot end is fine, but I can't figure out how to replace that one little part.
Any help would be appreciated.
BTW I have never had a jam with my hexagon. I calculated that I have printed more than 50 spools without a jam so far using all sorts of Amazon-purchased filament. That seems like a really good thing. Now I have had many other things wreck a print, but most of those come down to adhesion issues etc. and general operator error/stupidity
Thanks!
Cameron
-
01-11-2016, 09:31 PM #2
- Join Date
- Jul 2014
- Posts
- 305
-
01-13-2016, 08:09 AM #3
When did Colin start sending those wit the Hexagon?
-
01-13-2016, 01:59 PM #4
- Join Date
- Jan 2015
- Posts
- 48
Thanks for the link!
-
01-13-2016, 02:00 PM #5
- Join Date
- Jan 2015
- Posts
- 48
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help