Close



Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Student
    Join Date
    Dec 2015
    Location
    Carson City, NV
    Posts
    5
    Add turbonium on Thingiverse

    Question Why Can't I slice Wheels or Rims face up without getting a plug/disc covering it?

    Has anyone tried to print wheels or wheels and tires face up? Why do three different slicing programs (MakerBot Desktop, Cura, and ReplicatorG) all put an extra disc or plug of material over the top of the wheel, completely blocking it?

    See also photos...

    Here's a photo of the STL

    sketchup.jpg

    These next images are progressive screen captures from Cura - MakerBot Desktop does the same thing.
    cura1.jpg so far so good...

    cura2.jpg.... wait, what? Where'd the disc come from? The settings are no support material!


    cura4.jpg total fail.


    Why does this happen when I select no raft and no supports?

    Printer is a Flash Forge Creator Pro but I don't think its the printer.
    Attached Images Attached Images

  2. #2
    Student
    Join Date
    Dec 2015
    Location
    Carson City, NV
    Posts
    5
    Add turbonium on Thingiverse
    Kris_wheel2.stl ....here's the STL file

    Pic of failed Prints, facing up. The wheel is in there, but it's covered with the unrequested plastic.
    IMG_7741.jpg

    Am I crazy?

    Oh yeah and I am using the STL import/exporter in Sketchup.

    I also just downloaded Slic3r and tried it, also total fail with Slic3r.

    Thanks!
    Last edited by turbonium; 12-31-2015 at 05:53 PM.

  3. #3
    Student
    Join Date
    Oct 2015
    Location
    Ohio
    Posts
    35
    Add JohnnyV on Facebook
    I have the same issue with Simplify3D.

    Its a problem with your model. You have an open edge or something.

    I ran it through netfabb basic (free download), and now it slices fine.
    Attached Files Attached Files

  4. #4
    Student
    Join Date
    Dec 2015
    Location
    Carson City, NV
    Posts
    5
    Add turbonium on Thingiverse
    Oops actually Cura and MakerBot Desktop is still showing the disc despite the repaired file. It actually changed the model at the base of the wheel and the center cap as well.
    Last edited by turbonium; 12-31-2015 at 08:21 PM. Reason: OOPS

  5. #5
    Student
    Join Date
    Oct 2015
    Location
    Ohio
    Posts
    35
    Add JohnnyV on Facebook
    Hmm...the repaired file slices fine on Simplify3D for me.

    You can try fixing your model in sketchup or try makeprintable.com

  6. #6
    Student
    Join Date
    Dec 2015
    Location
    Carson City, NV
    Posts
    5
    Add turbonium on Thingiverse

    Unfortunately still not fixed

    Thanks for the help guys. Still not there though.

    Here's another STL that doesn't work and is a wheel. I borrowed this from a Karmann Ghia model on 3Dwarehouse for sketchup. Same problem different wheel.
    Wheel_only.stl

    Sketchup is awfully particular whenever I make or edit solids, so I'm finding it hard to believe that there's something wrong with the model I made, and it just so happens to be the same, exact, identical problem with some other wheel (the wheel from the Karmann Ghia). Just doesn't make sense that it's the models.

    For the folks that ran the model through netfabb, here's the sliced screen captures I see...
    repaired1.jpg only 5 lug holes now
    repaired2.jpg filling in the area above the wheel lug flange
    repaired3.jpglooking like a wheel again
    repaired4.jpg oops here's the disc again.

    Whether Simplify3d does this properly or not, I've gotten in contact with their tech support. I'm hopeful! I don't currently own their software but would consider it if their product fixes the issue.

    Does anyone know if Replicator, Cura, MakerBot and possibly others have a less than ideal slicing engine (or engines)?

    Thanks,
    Kris W.

  7. #7
    Student
    Join Date
    Feb 2015
    Location
    Pinehurst North Carolina
    Posts
    9
    Hi Kris,

    I believe that the problem is with the stl model. I use Simplify3D and have made a number of similar wheels with no problems. When I loaded and sliced your stl and the repaired stl I had the same problem namely the flat disk on the top. I did a cross section on the stl model and found it to have a lot of oddly intersecting thin-walled surfaces which I suspect is the source of the problem.

    Chris

  8. #8
    Student
    Join Date
    Feb 2015
    Location
    Pinehurst North Carolina
    Posts
    9
    Kris,

    I modeled a similar tire and made a cross section. The thin walls of my stl file are clean intersections with no walls passing through another. The slice was good with no top plate. I am convinced that the stl model you downloaded is causing the problem.

    Chris

  9. #9
    Student
    Join Date
    Feb 2015
    Location
    Pinehurst North Carolina
    Posts
    9
    Kris,

    Here is the stl file I made. It is larger than yours but you can slice it for an example.

    tire.stl

    Chris

  10. #10
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    Can I suggest you stop using sketchup - which isn't a solid modelling program and start using something which is.

    The autodesk freebies are a good place to start: http://www.123dapp.com/

    Also openscad - my favourite.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •