Results 1 to 8 of 8
Thread: Lessons Learned for Newbies
Threaded View
-
02-26-2014, 02:14 AM #7
- Join Date
- Oct 2013
- Location
- California LA
- Posts
- 99
Not sure what printer you got but any well ventilated place will work fine.
I would recommend printing with PLA first before going into ABS.
Some people like using the blue painter type but Kepton type seems to work best forme.
This site has some good info. http://www.repetier.com/documentatio...rffirst-tests/
Hope that helps.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion