Results 31 to 32 of 32
Thread: R.I.P. Power Supply
-
12-17-2015, 02:54 PM #31
- Join Date
- Aug 2015
- Location
- Vail, CO, USA
- Posts
- 36
ok everyone,
i tested with my other ramps, which worked. so i remapped the heated bed pins to D9 in pins.h on the stock ramps, and the whole thing works!
problem solved - hopefully.
thanks so much for all of your help and replies, im very impressed with this forum.
-
12-17-2015, 03:13 PM #32
- Join Date
- Aug 2015
- Location
- Vail, CO, USA
- Posts
- 36
guess what? theres another problem.
when i tell the bed to preheat to 75˚ it blows past and just keeps heating until it reaches 90˚ at which point I unplugged it. Some people have had similar problems except their beds immediately do this when the printer is turned on. Mine only starts when I tell it to.
im going to make a new thread for this, see http://3dprintboard.com/showthread.p...6266#post76266
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery