Results 1 to 8 of 8
Threaded View
-
12-16-2015, 06:39 PM #6
- Join Date
- Jul 2014
- Posts
- 305
If it is leaking out of the top of the nozzle, I would follow Tom's Guide:
https://www.youtube.com/watch?v=xr02pG58gaU
I used his method of tightening the nozzle against the break, and I have never had a leak.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion