Results 1 to 4 of 4
Thread: duplicator i3
-
11-25-2015, 01:14 AM #1
- Join Date
- Nov 2015
- Posts
- 2
duplicator i3
Is this a nice printer, for hobby use?
plugnplay, easy to take care of, works, don`t have to adjust/calibrate it each time
Wanhao - Duplicator i3
http://3dnet.no/collections/featured-1/products/i3
-
11-25-2015, 11:06 PM #2
Wanhao duplicator i3 is a great printer to start off!
-
11-26-2015, 11:42 AM #3
Hi!
We from www.3DMarkt.at make a Black Friday Sale
where you can buy the Wanhao Duplicator i3 for 445Euro!
Check our side!
-
12-01-2015, 05:54 AM #4
- Join Date
- Mar 2014
- Posts
- 8
I recently got one.
It's not plug and play. Moreso than a regular reprap, but you still have to get to work.
Issues i have resolved:
Driver issues with the virtual com port (The drivers from FTDI, didn't work with automatic install)
Loose axes.
Loose fan cable in the power supply.
I ordered a glass plate for a new bed, as everyone recommends it.
Currently struggling with getting my prints really nice.
But on the plus side is the metal frame and a relatively large community to ask. And it is easy to assemble...
Printer will print perfect...
Today, 09:40 AM in Tips, Tricks and Tech Help