Results 1 to 7 of 7
Thread: Leaky Hot End
Threaded View
-
11-21-2015, 11:55 AM #4
I don't know if this is true... But I suspect you need to take the nozzle assembly all the way apart to clear any plastic that has 'leaked'.
I don't know if this is true... But I suspect you need to take the nozzle assembly all the way apart to clear any plastic that has 'leaked'.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion