Results 1 to 7 of 7
Threaded View
-
10-30-2015, 10:40 AM #5
- Join Date
- Sep 2015
- Posts
- 12
My "newer" is the MK7/8 look alike with the U shaped knurled channel - the older is the plain knurled cylinder.
I realize clicking isnt exclusively because of the extruder gear, but my other printer is set up identically and it seems to feed filament more positively - with less skipping in normal operation. The "older" gear seems to pick up more flament and become slicker with operation...
Although this is only going from my limited experience... I'm a firm believer in prevention is the best cure.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help