Results 1 to 10 of 20
Thread: Extruder Upgrade assemblies ??
Threaded View
-
10-21-2015, 02:12 PM #6
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Check your start Gcode. You can change the current with G130.
If you have a line like (for example) G130 X127 Y127 A127 B127 in your start.gcode then your current is maximum already. The value is a 7 bit number from 0 (no current) to 127 (max current)
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)