Results 1 to 8 of 8
Thread: ABL after each print
Threaded View
-
10-19-2015, 08:01 AM #4
- Join Date
- Jan 2015
- Posts
- 68
I also run a G28 and then a G29 before each print. It's in the starting GCode in Sli3er
I also run a G28 and then a G29 before each print. It's in the starting GCode in Sli3er
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion