Results 1 to 10 of 14
Thread: Bed warped suddenly?
Threaded View
-
10-16-2015, 11:49 AM #10
- Join Date
- Sep 2015
- Posts
- 15
Yeah I've used a rule and seems flat enough. Certainly not enough to cause the problem I'm having.
Something is moving as it stops extruding half way through a print probably due to a blockage.
I cable tied to two rods on the left and right that run front to back as these have a tiny bit of slack.
I'm also thinking the rods on the extruder are bent and it's almost perfectly in the middle on the bed it will touch. No idea how this could have happened.
Getting frustrated now tho
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion