Results 1 to 6 of 6
Threaded View
-
10-08-2015, 08:01 AM #2
Yes, easily doable. There are two main approaches:
1. Model bottom and top separately; print bottom, place metal, print top. Bottom must come up even with the highest metal face.
2. Model a shape with a cavity for the metal and code in a pause to insert the metal.
We haven't done it with such a large item, but we have modeled recesses to embed nuts for later capturing bolts.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion