Results 1 to 3 of 3
Thread: Smoothieboard
-
10-05-2015, 08:31 PM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Smoothieboard
Has anyone tried a Smoothieboard on there makerfarm?
Im curious if it made any noticeable improvement to quality
-
10-06-2015, 03:52 AM #2
We would also bee interested in peoples experience of this board.
-
10-06-2015, 07:54 AM #3
- Join Date
- Jul 2014
- Location
- Ontario, Canada
- Posts
- 257
I have a 5XC sitting around that I intended to put on my i3v or use in a Delta, but decided against it. From all the documentation that I've read, about the only thing I would need to revise is the auto levelling probe, as best I could find, there was no support for a servo driven retractable probe like what many of us run. Aside from that, it's a beautiful board, but I will probably be using a Duet 0.85 for my Delta build instead...
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion