Results 1 to 10 of 58
Thread: Print Quality issues (pictures)
Threaded View
-
10-02-2015, 06:39 AM #3
- Join Date
- Dec 2014
- Posts
- 42
Unfortunately, your post wasn't helpful at all. The quality is bad - it is worse than when the machine was newer. I am getting failed prints, strings, blobs, etc. Any time I waste ABS, it is not acceptable, and the horrible surface blobs on the above print are also unacceptable when the device is capable of printing perfect sides.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion