Results 1 to 10 of 13
Thread: Uneven PLA test prints, help!
Threaded View
-
08-25-2015, 03:37 PM #5
- Join Date
- Aug 2015
- Posts
- 5
I've bought it from ebay: http://www.ebay.co.uk/itm/1816555810...6058f86be&cp=1
I also run two more tests, using red fillament this time... and results are even worse
8. Ext. temp. 200 C, plate temp. 70 C, ext. speed 80mm/s (exactly the same extrusion temp as on "the best" no 3)
9. Ext. temp. 215 C, plate temp. 70 C, ext. speed 95mm/s (maybe i need to do another test reducing speed ?)
I am still very far from getting even close what I expect to get
Photo from side Photo from top
IMG_20150825_211457.jpgIMG_20150825_211516.jpg
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion