Results 1 to 5 of 5
Thread: 3D Printing Assembly
-
07-21-2015, 05:50 PM #1
- Join Date
- Jul 2015
- Posts
- 1
3D Printing Assembly
Hey there I have been interested in 3D printing for several years now but I just recently bought a RepRap Delta and it did not come with any instructions on how to piece it together since this is really my first device like this and my introduction to a whole new aspect of assembly I am not used I was wondering if anyone knew where to get instructions to put this together I have looked on youtube (maybe not hard enough) but could find nothing that really explains it step by step. PLEASE HELP someone lol
-
07-21-2015, 08:19 PM #2
- Join Date
- Aug 2014
- Location
- Montreal, Quebec
- Posts
- 576
You can inspire the assembly manual of the Rostock Max V2 Delta from seemecnc. They have lots of pictures and it will definitely give you an idea on how to assemble them.
-
08-17-2015, 03:14 AM #3
- Join Date
- Jul 2015
- Posts
- 29
You can download some useful files here I think: http://www.reprap-france.com/centre-telechargement
-
08-18-2015, 04:34 AM #4
The build instructions of the Spider bot are really comprehensive and free to download.
I don't know how similar this is to your machine but give it a try. http://www.spiderbot.eu/en/support/assembly-manual.html
-
08-19-2015, 12:04 AM #5
Hi Nucha! You can read this step by step tutorial (with pictures) to help you assemble your first 3d printer. http://richrap.blogspot.com/2013/10/...ld-part-3.html Hope this helps!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion