Results 1 to 4 of 4
Thread: Extruder not feeding
Threaded View
-
08-16-2015, 07:41 AM #4
BTW, that picture seems to be a variation of the MKS base. http://reprap.org/wiki/MKS_BASE
But there's still some confusion. Your board is marked as a v1.3 board and has the stepper drivers integrated onto the board. Searching the web for MKS boards, other v1.3 boards require separate drivers to be plugged onto the base board.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion