Results 1 to 2 of 2
Thread: Need RAMPS Firmware Zip
Threaded View
-
08-08-2015, 04:01 PM #2
Can't help with the full zip, but the only difference for the e3d *should* be the type of thermistor for the hot end. In the following line from file configuration.h, the 1 value would change to 5 for the e3d.
#define TEMP_SENSOR_0 1
EDIT: In other words, I'm suggesting you could get by through using the firmware zip from the link for the standard firmware in the build guide, editing in the above change.Last edited by printbus; 08-08-2015 at 04:41 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help