Results 1 to 4 of 4
Thread: Filament jams after slow layer
Threaded View
-
08-07-2015, 10:20 PM #2
- Join Date
- Feb 2015
- Posts
- 371
I measured the filament and it is 2.92 on average. I took about my E3dv6 and the filament barely slides through the heatbreak. I can only imagine that as the filament expands that that is causing the jam. It is getting caught in the heatbreak.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help