Results 1 to 6 of 6
Threaded View
-
08-03-2015, 03:44 AM #2
- Join Date
- Mar 2015
- Location
- Slovenia, Europe
- Posts
- 76
Hi there
if extruding works ok and extruded line is thick, then I would check distance between nozzle and build plate.
If nozzle is leveled too close to build plate then it can't extrude while you start your print job.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion