Results 1 to 10 of 11
Threaded View
-
07-23-2015, 09:19 PM #9
command for the LED light pwm controls is:
M42 P5 S255 ; light on 100%- light is connected to RRD fan extender second plug. if you have a fan plugged in there should work the same.
M106 S255 turns the cooling fan on 100%. M107 is off. RRD fan extender first plug
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion