Results 31 to 40 of 74
Thread: Free build plate!!!!
-
06-29-2015, 04:23 AM #31
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Grateful for the offer but it seems that with the heated cabinet it is not going to work.
I am sure that for normal non-sticking ABS problems it is an ideal solution but I never had that problem, my problem has always been getting the prints off the bed. This is what happened after I stuck the gritty sheet to polycarbonate.
20150626_205520.jpg
-
06-29-2015, 04:58 AM #32
- Join Date
- Jun 2015
- Posts
- 34
oh wow.
what temp was the print and was this pla or abs
and did you use a heated bed
-
06-29-2015, 08:10 AM #33
- Join Date
- Oct 2014
- Posts
- 314
-
06-29-2015, 09:43 AM #34
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
ABS
No heated bed.
Chamber temperature 50 C.
Print temperature 225 C
-
06-29-2015, 10:15 AM #35
wow !
thought I had excess sticking problems.
But so far I've managed to remove things either by hitting them with a hammer or heating the bed and hitting them with a hammer.
I will have to add: hammer to crucial 3d printer kit :-)
-
07-03-2015, 03:42 PM #36
- Join Date
- Mar 2015
- Location
- Fenton, MI
- Posts
- 63
Did I get in on time? I replied in post #21. Just checking.
-
07-03-2015, 06:33 PM #37
- Join Date
- Jun 2015
- Posts
- 34
yes you did. your address is on the list of "ToDo"
might be a couple weeks before you receive the build plate though
-
07-06-2015, 11:11 AM #38
- Join Date
- Jul 2015
- Location
- Earth
- Posts
- 6
Hello, I have a MakerTrack with a 304mm X 304mm bed. I'm willing to pay for one if not overly expensive.
Thank you
-
07-06-2015, 11:16 AM #39
- Join Date
- Jun 2015
- Posts
- 34
the maximum we can do is 300mm x 300mm
they will be available on the ebay listing within a couple weeks hopefully.
we sell them at £19.99 or $31.24
we are still pending some reviews on here, and we only recommend using PLA for printing as the ABS still seems to be very tricky to use. untested is the pva and nylon
-
07-06-2015, 12:25 PM #40
- Join Date
- Jul 2015
- Location
- Earth
- Posts
- 6
300mm will work. Thanks for the info. What about PETG?
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help