Results 1 to 3 of 3
-
06-24-2015, 07:18 PM #1
- Join Date
- Jun 2015
- Posts
- 13
Duplicator i3 firmware/Drivers for Simplify3D?
I have a Duplicator i3, and Simplify3D, but being new to 3D printing am having a little trouble.
I would really like to have my i3 hooked up via USB to take full advantage of the controls and setting in Simplify3D.
But, for the life of me I cant get my PC/Simplify3D to recognise the i3, so am having to put everything on SD card to print.
Is there some firmware/Drivers I need, as the i3 did not come with a CD?
-
07-02-2015, 03:49 AM #2
- Join Date
- Jun 2015
- Location
- Arizona
- Posts
- 7
Just came across this thread.... Hope that these links help you out! I just found these links only a couple of mins ago when searching for the same information.
http://3dprinterbrain.com/pmwiki.php...eepromsettings
http://3dprinterbrain.com/pmwiki.php/DupI3/Firmware
I just got my machine 2 days ago, and am experimenting with it. I am very new to this world of 3D printing, so finding a way to keep it simple helps. Honestly, WanHao should have included setup files and info of our printboards on the SD Card besides a copy of Cura.
Personally, I am finding that I like the way that Repetier-Host and Slic3r work compared to Cura to create G-Code files. At this time I am only using the SD Card method, not the USB Cable method to start printing. One other thing that has been bugging me is that I am having issues with the G-Code not warming up the bed or extruder, however it may be my malfunction, lol.
TomLast edited by TeamTEOR; 07-02-2015 at 03:56 AM.
-
07-02-2015, 06:00 AM #3
peps1 - post your enquiry on the simplify3d forum. Someone will know the correct profile to load and modify.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion