Results 1 to 3 of 3
-
06-30-2015, 06:41 PM #1
- Join Date
- Mar 2015
- Posts
- 3
Help diagnosing issue with Plate dimensions
I have a Prusia i3 model with an aluminum heated plate, It's physical dimensions are 220mm square, due to the y Carriage the usable Y area is about 170 but the X axis I can manually move beyond the 220 mark so I should be able to use it. But no matter what I do My X will not go beyond 200, and there is a mismatch from real plate to the virtual plate... I suppose I am missing something here.
Screenshot 2015-06-30 19.39.15.jpgScreenshot 2015-06-30 19.36.44.jpg
-
07-01-2015, 04:14 PM #2
-
07-01-2015, 05:18 PM #3
- Join Date
- Mar 2015
- Posts
- 3
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion