Results 1 to 7 of 7
Threaded View
-
06-29-2015, 05:27 PM #7
- Join Date
- May 2015
- Posts
- 107
Thanks printbus. I got it. I moved the extender up 2 pins and plugged it in the RAMPS, applied power, got a green light (nothing exploded). I plugged the print fan in and got no movement until I realized I had reversed the wires. It works great now and you were correct, I did not have to do anyting to the firmware.
On to the next issue..........
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion