Results 1 to 10 of 10
Threaded View
-
06-22-2015, 02:10 PM #2
- Join Date
- May 2015
- Posts
- 39
I had a similar problem that I solved by setting the Retracting, Minimum travel (mm) from Cura's default 2.5mm to 1.5mm. I guess the soft ABS was getting stuck in the Teflon tube inside the "all metal" Chinese extruder.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion