Results 1 to 9 of 9
Thread: Slic3r Version Difference Issue
Threaded View
-
06-21-2015, 04:10 PM #8
- Join Date
- Nov 2014
- Posts
- 522
If i am not mistaken, the default of 0.4 is probably set from your nozzle diameter :-)
If i am not mistaken, the default of 0.4 is probably set from your nozzle diameter :-)
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help