This is what I get.


>>>g29 v 4 t
SENDING:G29 V 4 T
Roxy's Enhanced G29 Auto_Bed_Leveling Code V1.81:
Full support at http://3dprintboard.com
Eqn coefficients: a: 0.00 b: 0.00 d: 0.00
Mean of sampled points: 0.000000


Bed Height Topography:
+0.00000 +0.00000 +1.00000
+0.00000 +0.00000 +0.00000
+0.00000 --0.00000 +0.00000


planeNormal x: 0.00 y: 0.00 z: 1.00


Bed Level Correction Matrix:
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000


I thinks its perfectly level, not sure how, is this some kind of default somewhere?