Results 1 to 10 of 14
Thread: The ABS Challenge
Threaded View
-
05-14-2015, 04:03 PM #7
- Join Date
- Mar 2015
- Location
- Palo Alto
- Posts
- 63
I don't really use an Ultimachine, ABS or Cura, but have found the following page generally useful: http://support.3dverkstan.se/article...uide#pillowing.
They suggest that in addition to have enough layers on top, you may also need part cooling during the top layers.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help