Results 11 to 17 of 17
Thread: Tips for a beginner?
-
05-06-2015, 10:06 AM #11
-
05-06-2015, 11:50 AM #12
- Join Date
- May 2015
- Posts
- 5
Todd67 and Bassna thanks for your advices
curious aardvark: I live in Poland. I'm totally a beginner. I only have 2d design experience. I've never tried 3d but with help of some of my friends in Poland, i will be launching my own business regarding those 3d printed materials. Actually because of the fact that Pirx is a polish brand, i've been interested in that since it may be easier to bring the printer to service in case of any failure. Buying a chinese product could be cheaper. Buying a good stuff with paying less is a good option but what if the printer gets broken? I don't want to send the printer to China and then wait for it for about 2-3 months for the return
Here in Poland and also in all of the european union countries, the rules are strict so before beginning to sell 3d printed materials, i guess i have to send some samples to labs made both from ABS and PLA to get confirmation from the state. For the printer: The most important 2 things are calibration and speed. (best option for a decent budget) and for the filament: Durable and smooth material without any health risk.
Is there also a chance to adjust the hardness of the printed material from both filaments?
Best Regards,
M.
-
05-06-2015, 03:24 PM #13
- Join Date
- Apr 2015
- Location
- Northern Ohio
- Posts
- 198
To be honest with you when you get into 3d printing you fix most things yourself. These things are not terribly complicated and that is why we advise to get one with good customer support and a popular model so you can find out how to fix stuff from the forums and online sources like youtube. That is why I recommended FlashForge creator. It is a very popular printer that prints very well. Their customer support is also very good. Parts are readily available over the internet.
You cannot change the hardness of the materials but you can change the infill density to make the parts stronger. There are times when I just want a representation of something so I use 10-20% infill. Other times I want a part that is representative of the injection molded part and I use 100% infill. PLA feels harder than ABS because it is stiffer. Nylon is stronger than ABS and PLA but is hygroscopic so you wouldn't want to use it in applications involving water as it will swell over time.
As far as selling printed items in EU with their restrictions I would suggest settling on a filament that is made in the EU. The company can more than likely supply you with the proper MSDS data and any other documentation required for printed objects.
-
05-07-2015, 03:09 AM #14
- Join Date
- May 2015
- Posts
- 5
Thank you Todd-67. Maybe you are right. If customer support is great with a popular brand around the world, i can get as much help as possible from here, other forums and channels like youtube. And also i liked your suggestion about asking the local filament developers if i need to get any documents before selling stuff made from them. PLA or ABS that's the biggest question right now Some say ABS and some say PLA. That's like ATI vs NVIDIA Both have advantages and disadvantages against each other. Since durability and smoothness of the item is the major fact for me i guess i will go with ABS although some say that PLA can be as durable as ABS. Really tough matter :/
-
05-07-2015, 10:49 AM #15
PLA can be as tough as ABS. It really all boils down to what you want to use it for. I see you mentioned phone cases, & if that's the case -- pun intended! -- then ABS may be a bit more suitable. We've built a few phone cases out of PLA & have seen mixed results.
-
05-07-2015, 10:54 AM #16
-
05-08-2015, 12:14 PM #17
- Join Date
- Oct 2014
- Posts
- 441
If you want smooth, I recommend ABS and Acetone vapor bath.
http://sinkhacks.com/building-aceton...printed-parts/
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help